The easiest way to pass 300-180 Troubleshooting Cisco Data Center Infrastructure: Valid 300-180 Dumps

Cisco 300-180 exam is an important part of Cisco certification.You do not need to worry for the 300-180 exam dumps preparation as Pass4itsure has made it easier to prepare for the Cisco 300-180 exam.Latest 300-180 Dumps https://www.pass4itsure.com/300-180.html is a reliable platform that offers 100% genuine exam questions for 300-180 with passing assurance.

pass-300-180-exam

About Cisco Certifications

Cisco Certifications help you launch and advance your IT Networking career. Find the right Cisco certification for you.

  • The Entry-level certifications

Intended for beginners who wish to become networking professionals.

CCENT
CCT
  • The Associate-level certifications

Include Cisco Certified Design Associate (CCDA), Cisco Certified Network Associate (CCNA), which is further divided into CCNA Cloud, Collaboration, Data Center, Cyber Ops, Routing and Switching, Industrial, Security, Service Provider, and Wireless.

CCDA
CCNA
  • The Professional-level certifications

Include Cisco Certified Design Professional (CCDP) and Cisco Certified Network Professional (CCNP).

CCDP
CCNP
  • The topmost level of accreditation is Architect.

Cisco Certified Architect (CCAr)

Entry-level, quasi-professional and professional-level certificates are valid for three years, CCIE and expert certificates are valid for two years, and CCAr is valid for five years. To keep certifications up-to-date, Cisco professionals need to recertify by recertifying exams or advancing to a higher level in the Cisco certification system.

How much does it cost to be certified by Cisco?

The Entry-level certificationsMost technician exams cost $125 each.
The Associate-level certificationsThe cost of each exam is $300.
The Professional-level certificationsThe written test costs $450 while the practical one – $1600.
ArchitectFee cost $15,000 in total.

300-180 exam

Troubleshooting Cisco Data Center Infrastructure (DCIT)

ExamBy:Cisco
ExamCode:300-180
ExamName:Troubleshooting Cisco Data Center Infrastructure (DCIT)
RelatedCertification(s):CCNP Data Center

More Cisco exams dumps, maybe you are interested.

Pass4itsure 300-180 exam dumps ,you only need to spend Only: $45.99

Pass4itsure-300-180-exam

When you purchase any new exam products from pass4itsure.com, you can get a 15% discount with the discount coupon code “[email protected]“.

Pass4itsure 15%

Points to remember during the selection of authentic and latest 300-180 exam study source:

  • Make sure the site is trustworthy.
  • This material should be related to the 300-180 Cisco Troubleshooting Cisco Data Center Infrastructure exam.
  • Materials should be easy to understand and learn.

Choose Pass4itsure

Do you maintain 100% Guarantee on Pass4itsure.com products?

Yes. Our PDF of 300-180 exam is designed to ensure everything which you need to pass your exam successfully. At Pass4itsure.com, we have a completely customer oriented policy. We invite the rich experience and expert knowledge of professionals from the IT certification industry to guarantee the PDF details precisely and logically. Our customers’ time is a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.

Do you provide free updates?

Yes, once there are some changes on 300-180 exam, we will update the study materials timely to make sure that our customer can download the latest edition. The updates are provided free for 120 days.

I can assure you, after the preparation of 300-180 Cisco Troubleshooting Cisco Data Center Infrastructure exam via Pass4itsure study source you’ll score 100% marks in the exam. You will be able to clear the 300-180 exam at the very first attempt with 100% marks.

Latest 2019 Cisco 300-180 Actual Free Exam Questions

QUESTION 1
Some of your servers do not have IP connectivity to the upstream network. Which two commands do you use to identify
whether a data path is up and running on a switch? (Choose two.)
A. show platform fwm info hw-stm
B. show interface brief
C. show npvflogi-table
D. show mac-address table
E. show pinning border-interfaces active
Correct Answer: BD

QUESTION 2
Which option is the cause when a DIMM is marked as bad?
A. More than 16000 errors were witnessed during test execution during BIOS.
B. DIMM Blacklisting is enabled.
C. The DIMM is missing.
D. The bank of DIMMs is composed of different size DIMMs.
Correct Answer: A

QUESTION 3
OTV is configured ?test pings confirm that it is working but other tests do not seem to perform well. What is the
problem?
A. VLANs are not properly extended.
B. The multicast groups are not defined properly.
C. The transport network is not configured to process the overhead that is introduced by OTV.
D. The overlay may not be enabled.
Correct Answer: C

QUESTION 4
You create a storage VDC. The FCoE links fail to initialize correctly. Which command should you run to verify that you have correctly associated the VLAN to the VSAN?
A. show vdc storage membership
B. show vdc fcoe-vlan-range
C. show vlan fcoe
D. show vdc vlan-vsan-range
Correct Answer: C

QUESTION 5
Which two options are ways to identify the exact BIOS version of a Cisco UCS C-Series Rack-Mount Server? (Choose
two.)
A. Use the iFlash32 command and select the -i option.
B. Press F2 during server bootup.
C. Press F6 during server bootup.
D. Press F12 during server bootup.
E. Press F10 during server bootup.
F. Use the EFI interface.
Correct Answer: AB

QUESTION 6
Refer to the exhibit.

Pass4itsure 300-180 exam questions-q6

You customer reports that the virtual machines operating on Host3 are not communicating with the external network
.While troubleshooting you determine these facts:
*Host3 is a UCS blade chassis server connected to two fabric interconnect switches.
*The fabric interconnect switches are connected to the campus Cisco 6800 core switch.
*N1Kv is the virtual switch configured on the VMWARE hypervisor installed on Host3.
*port profile N1k-Uplink-Host3 is connecting Host3 virtual networks to the external network.
Which reason is the cause of this problem?
A. Port profile is the cause of this problem.
B. Port aggregation mode under the N1k-Uplink-Host3 port must be changed to passive.
C. Port aggregation mode under the N1k-uplink-Host 3 port profile must be changed to MAC pinning.
D. Port aggregation mode under the N1k-Uplink-Host3 must be removed.
Correct Answer: B

QUESTION 7
On the Cisco Nexus 7000 Series Switch, what could be the reason why the (config- vlan)#private-vlan primary
command fails?
A. There are not enough resources in the VDC.
B. You are using a reserved VLAN ID.
C. The VLAN is a secondary VLAN.
D. The interface is in the wrong VRF.
E. The PVLAN feature is not enabled.
F. The VLAN does not exist.
Correct Answer: E

QUESTION 8
Refer to the exhibit.

Pass4itsure 300-180 exam questions-q8

During a VSAN outage, you come across this configuration. Please select two possible causes? (Choose two)
A. no common VSANs on both switches
B. no common trunks
C. no common VSAN members in the same trunk
D. VSANs in trunk are the same, but the trunk is not up
Correct Answer: AC

QUESTION 9
Which two conditions can prevent FCoE from functioning properly across a link? (Choose two.)
A. LLDP is disabled.
B. PFC was negotiated across the link.
C. DCBX is enabled on the device.
D. The VFC interface is down.
E. The VSAN trunking protocol was enabled.
Correct Answer: AD

QUESTION 10
Which Cisco NX-OS command can be used to determine if OSPF hello packets are being transmitted and received
between neighbors?
A. show ip ospf interface
B. show ip ospf event-history statistics
C. show ip ospf statistics
D. show ip ospf traffic
Correct Answer: B

QUESTION 11
You have a vPC that is in a blocking state. Which issue can cause this problem?
A. You have a MAC address filter applied.
B. You have Bridge Assurance enabled on the vPC.
C. VLANs are missing from the peer link.
D. You have a Type 1 Configuration Element Mismatch
Correct Answer: B

QUESTION 12
Refer to the exhibit.

Pass4itsure 300-180 exam questions-q12

Which two commands are missing to enable OTV between N7K-A and N7K-B? (Choose two.)
A. otv site-vlan on both N7Ks
B. create vlan 5-10
C. enable virtual port-channel on vlan 5-10
D. enable eigrp on both N7Ks
E. enable hsrp feature
Correct Answer: AB

QUESTION 13
Refer to exhibit.

Pass4itsure 300-180 exam questions-q13

After a boot policy is added, the profile stops working. Which option is a possible cause of the issue?
A. An iSCSI adapter is being used on top of the vNIC.
B. Both of the adapters from fabric A and fabric B must be specified.
C. The name of the adapter is incorrect.
D. The boot target does not exist.
Correct Answer: A

Download from Google Drive Online:

[PDF] Free Cisco 300-180 pdf dumps: https://drive.google.com/open?id=1M3kdgxChjiRczABkDLb7HJqTmUHKI8Vd

Summarize:

This 300-180 Troubleshooting Cisco Data Center Infrastructure exam is not too easy to pass as people think about it, the best way to clear your certification is to get 300-180 dumps.Pass Cisco 300-180 dumps with pass4itsure Real updated 300-180 Dumps.https://www.pass4itsure.com/300-180.html Offering Updated Cisco 300-180 PDF with 100% Passing Guarantee.Success in Cisco 300-180 Exam with Valid 300-180 PDF Dumps.